DieSupplies.com - Precision Marshall Ground Flat Stock and Drill Rod / Precision Marshall Ground Flat Stock / All Products

W1 Cold-Drawn Flat Stock, Water Hardening Tool Steel Watercrat PM

Tue, 3 Dec 2013 18:08:00 GMT

W1 Cold-Drawn Flat Stock, Water Hardening Tool Steel Watercrat PM
Buy Now: $1.96

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Watercrat Water-Hardening Regular Tolerance (Precision Tolerance) Cold-Drawn Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI W-1 tool steel, annealed for easier machining. It is a fine-grained electric furnace-melted commercial grade tool steel which is supplied in the fully-spheroidized 100% decarb-free condition.

Watercrat is the least expensive grade of flat stock. The through-hardening characteristic has optimum response to heat treatment and provides toughness and excellent wear-resistance in service. Its high carbon content allows it to be used often without heat treatment for many applications.

The standard nominal sizes have a smooth drawn finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted red for easier identification of the steel type.

The Thickness |T| and Width |W| tolerance is ±.0005" for dimensions of .249" or less, ±.0010" for .250-.499", and ±.0015" for .500 and up. The Length |L| tolerance is +.125/-.000". This flat stock is also referred to as drill rod because it is manufactured by cold-drawing instead of by precision grinding.

The available thicknesses are 1/16 to 1 inches. The available widths are 1/16 to 1 inches. Please contact us if you need a different size, or if you need us to make any alterations.

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

HEAT TREATMENT: Heat thoroughly at 1425-1500°F. Hold one-half hour per inch of section and quench in water (brine). Sizes below 9/32" round or square may be quenched in oil.

TEMPERING DATA:

Temper °F	Rockwell C Hardness
As Hardened	66-68
300	64-65
400	62-64
500	58-59
600	54-56
700	50-51
800	46-47

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

H13 Oversize Ground Flat Stock, Hot Work Tool Steel Firechrome PM

Wed, 27 Nov 2013 21:16:00 GMT

H13 Oversize Ground Flat Stock, Hot Work Tool Steel Firechrome PM
Buy Now: $106.55

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Firechrome Oversize Tolerance Ground Flat Stock is made by Precision Marshall Steel Company. The steel type is AISI H-13 hot-work tool steel, annealed to 21 Rc (230 Brinell). It has an exceptionally fine structure resulting in improved machinability, polishability and high temperature tensile strength. Applications include hot-work tools, die casting molds, extrusion tools, forging dies, hot shear blades, stamping dies, and plastic injection mold details.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted brown for easier identification of the steel type.

The oversize Thickness |T| tolerance is +.010/+.015". The oversize Width |W| tolerance is +.010/+.015". The Length |L| tolerance is +.188/.375".

The available thicknesses are 1/4 to 1 inches. The available widths are 1 to 4 inches. Please contact us if you need a different size, or if you need us to make any alterations.

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

HEAT TREATMENT: Vacuum furnaces or protective atmosphere furnaces are recommended to prevent decarburization. Preheat thoroughly to 1450/1500°F and heat to 1800/1875°F, hold 30 minutes at temperature. Pressure quench in vacuum or air cool to 150°F, then temper immediately. If complicated designs or large sections are to be heat treated, an interrupted oil quench to 1000°F may be used.

TEMPERING DATA: Double temper one hour per inch of section thickness, two hours minimum per temper. Representative hardness levels after tempering are tabulated below. Air quenched from 1800°F. Tempered 4 to 6 Hours.

Temper °F	Rockwell C Hardness
As quenched	48-50
1000	50-52
1050	47-49
1100	46-48
1150	43-45
1200	32-34

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

420 Oversize Ground Flat Stock, Stainless Steel Ruetom Special PM

Wed, 27 Nov 2013 20:06:00 GMT

420 Oversize Ground Flat Stock, Stainless Steel Ruetom Special PM
Buy Now: $191.32

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Ruetom Special Oversize Tolerance Ground Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI 420 stainless steel, annealed to 25 Rc (255 Brinell). Its composition and properties are between 410 and 440C stainless steel. Ruetom Special has high hardness and responds excellently to polishing. It can be heat treated and it is magnetic. Corrosion resistance is maintained up to 1150°F (621°C). The yield strength is 50,000 psi (345 Mpa). Ruetom Special is ideal for manufacturing plastic injection mold cavities, knives, shafts, and surgical instruments.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted pink for easier identification of the steel type.

The oversize Thickness |T| tolerance is +.010/+.015". The oversize Width |W| tolerance is +.010/+.015". The Length |L| tolerance is +.500/-.000".

The available thicknesses are 1/4 to 1-1/2 inches. The available widths are 1 to 6 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED:
PM Oversize GFS, Premar 440C Stainless Knife Steel, 24" Long
PM Regular GFS, Premar 410 Stainless Steel, 24" Long

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

410 Precision Ground Flat Stock, Stainless Steel Premar PM

Wed, 27 Nov 2013 19:31:00 GMT

410 Precision Ground Flat Stock, Stainless Steel Premar PM
Buy Now: $74.02

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Premar 410 Regular Tolerance Precision Tolerance Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI 410 stainless steel, annealed to 18 Rc (217 Brinell). It is a chromium alloy (martensitic) stainless steel that can be heat treated for improved wear resistance and extra hardness up to 41-43 Rc (381-400 Brinell). Corrosion resistance is maintained up to 1300°F (705°C). The yield strength is 30,000 psi (207 Mpa). Typical applications include fasteners, machined parts, and shafts.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted orange for easier identification of the steel type.

The Thickness |T| tolerance is ±.001". The Width |W| tolerance is +.000/.005, when W > T and the profile is rectangular. When W=T the profile is square and the width tolerance is ±.001". The Length |L| tolerance is +.500/.000".

The available thicknesses are 1/16 to 1-1/2 inches. The available widths are 3/16 to 12 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED:
PM Oversize GFS, Premar 440C Stainless Knife Steel, 24" Long
PM Oversize GFS, Ruetom 420 Stainless Steel, 24" Long

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

440C Oversize Ground Flat Stock, Stainless Steel Premar PM

Wed, 27 Nov 2013 18:37:00 GMT

440C Oversize Ground Flat Stock, Stainless Steel Premar PM
Buy Now: $109.97

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Premar 440C Oversize Tolerance Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI 440C stainless steel, annealed to 21-28 Rc (229-269 Brinell). When heat treated Premar 440C is one of the hardest stainless steels, up to 57-62 Rc (595-688 Brinell), which makes it suitable for making premium quality knives, cutters, blades, bearings, and valves. It has good wear resistance due to its high carbon content. It is magnetic.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted light blue for easier identification of the steel type.

The oversize Thickness |T| tolerance is +.010/+.015". The oversize Width |W| tolerance is +.010/+.015". The Length |L| tolerance is +.500/-.000".

The available thicknesses are 1/16 to 2-1/2 inches. The available widths are 3/16 to 12 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED:
PM Regular GFS, Premar 410 Stainless Steel, 24" Long
PM Oversize GFS, Ruetom 420 Stainless Steel, 24" Long

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM, 72" Long

Wed, 27 Nov 2013 10:01:00 GMT

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM, 72" Long
Buy Now: $90.16

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Nutec42 Pre-hardened Regular Tolerance (Precision Tolerance) Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI type 4142 modified steel, pre-hardened to 26-34 Rc (261-321 Brinell).

It is normalized and tempered in a machinable condition of approximately 85% compared to 1.00% carbon steel. It is useful in applications requiring a lower hardness and less wear resistance than a fully heat treated tool steel but can be flame-hardened where a greater hardness is needed.

The standard nominal sizes are ground to a satin finish on four sides, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted red for easier identification of the steel type.

The Thickness |T| tolerance is ±.002". The Width |W| tolerance is +.000/.005, when W > T and the profile is rectangular. When W=T the profile is square and the width tolerance is ±.002". The Length |L| tolerance is +1.0/-.00".

The available thicknesses are 1/8 to 1 inches. The available widths are 5/16 to 6 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED: PM Precision GFS, Nutec42 4142 Pre-hardened Ground Tool Steel, 18" or 36" Long

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM

Tue, 26 Nov 2013 21:39:00 GMT

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM
Buy Now: $23.38

TO BUY ONLINE:

Select a Size |T x W| and a Length |L| in the menus above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Nutec42 Pre-hardened Regular Tolerance (Precision Tolerance) Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI 4142 modified steel, pre-hardened to 26-34 Rc (261-321 Brinell).

It is normalized and tempered in a machinable condition of approximately 85% compared to 1.00% carbon steel. It is useful in applications requiring a lower hardness and less wear resistance than a fully heat treated tool steel but can be flame-hardened where a greater hardness is needed.

The standard nominal sizes are ground to a satin finish on four sides, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted red for easier identification of the steel type.

The Thickness |T| tolerance is ±.001". The Width |W| tolerance is +.000/.005, when W > T and the profile is rectangular. When W=T the profile is square and the width tolerance is ±.001". The 18" Length |L| tolerance is +.125/.250". The 36" Length |L| tolerance is +.250/.500".

The available thicknesses are 1/16 to 1 inches. The available widths are 3/16 to 10 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED: PM Precision GFS, Nutec42 4142 Pre-hardened Ground Tool Steel, 72" Long

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

S7 Oversize Ground Flat Stock, Shock Resistant Tool Steel Super-7 PM

Tue, 26 Nov 2013 20:55:00 GMT

S7 Oversize Ground Flat Stock, Shock Resistant Tool Steel Super-7 PM
Buy Now: $19.88

TO BUY ONLINE:

Select a Size |T x W| and a Length |L| in the menus above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Super-7 Oversize Tolerance Ground Flat Stock is made by Precision Marshall Steel Company. The steel type is AISI S-7 shock-resistant tool steel, annealed for easier machining.

Super-7 is suitable for use in applications requiring high impact strength such as shears, punches, blanking dies and chisels. Its superior soundness makes it suitable for high-hardness plastic molds and zinc die casting dies.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted black for easier identification of the steel type.

The oversize Thickness |T| tolerance is +.010/+.015". The oversize Width |W| tolerance is +.010/+.015". The 18" Length |L| tolerance is +.125/.250". The 36" Length |L| is tolerance +.250/.500".

The available thicknesses are 1/8 to 1/2 inches. The available widths are 1/2 to 6 inches. Please contact us if you need a different size, or if you need us to make any alterations.

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

HEAT TREATMENT: SUPER-7 is subject to decarburization during heat treatment, so a protective atmosphere furnace or a vacuum furnace should be used. After preheating 1200/1250°F, soak material for one half hour per inch of thickness. When material reaches this temperature, heat to 1725°F, then soak material for one half hour per inch of thickness when material is up to this temperature. Air cool or oil quench to hand warm (approximately 150°F) and temper immediately. Note: Sections over two inches thick should be interrupt oil quenched or full oil quenched to attain full hardness.

TEMPERING DATA: Double temper one hour per inch of section thickness to desired hardness at a heating rate of two hours per inch. Cool in air to room temperature between the two tempers. Representative hardness levels after tempering are tabulated below. Oil quenched from 1725°F. Tempered 4 Hours.

Temper °F	Rockwell C Hardness
400	56-58
500	54-56
600	53-55
700	52-54
800	52-54
900	51-53
1000	49-52
1100	46-48
1200	39-41

Note: Variations in section size, heating rate, soak time, quench rate and tempering will cause deviations from the above values. Contact us for specific applications. The tempering range from 600° to 800°F should be avoided due to a drop in impact strength. Recommended working hardness ranges are RC 56-58 or RC 50-52.

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

C1018 Precision Ground Flat Stock, Low Carbon Steel Marshallcrat PM

Tue, 26 Nov 2013 19:25:00 GMT

C1018 Precision Ground Flat Stock, Low Carbon Steel Marshallcrat PM
Buy Now: $11.89

TO BUY ONLINE:

Select a Size |T x W x L| in the menu above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Marshallcrat Regular Precision Tolerance Ground Flat Stock (Gauge Stock) is made by Precision Marshall Steel Company. The steel type is AISI C-1018. It is a finegrained, vacuum-degassed carbon steel. It is easily machined, has excellent weldability. It responds uniformly to case hardening. The manganese content provides greater strength and hardness compared to many other carbon steels. It is often used in its natural state for such applications as backup plates, stripper plates, punch pads and machine parts. As a case hardened material, it is used for jigs, fixtures, cams and patterns.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. At least one end is painted yellow for easier identification of the steel type.

The Thickness |T| tolerance is ±.001". The Width |W| tolerance is +.000/.005, when W > T and the profile is rectangular. When W=T the profile is square and the width tolerance is ±.001". The Length |L| tolerance is +.188/-.375".

The available thicknesses are 1/16 to 2-1/2 inches. The available widths are 3/16 to 12 inches. Please contact us if you need a different size, or if you need us to make any alterations.

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

HARDENING: For carburizing to maximum hardening depth of 1/32", hold in carburizing salt at 1700°F for three hours. For Case Hardening hold in sodium cyanide salt bath at 1500°F for one-half hour. Maximum case depth is .006".

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

D2 Oversize Ground Flat Stock, High Carbon Tool Steel Aristocrat PM

Sun, 24 Nov 2013 20:06:00 GMT

D2 Oversize Ground Flat Stock, High Carbon Tool Steel Aristocrat PM
Buy Now: $22.97

TO BUY ONLINE:

Select a Size |T x W| and a Length |L| in the menus above.
Enter the quantity you need in the text box.
Click Add To Cart.

EXTRA DISCOUNTS: Purchase this item by itself or with any other items from Precision Marshall's category to receive an extra discount based on the total value of category products in your Shopping Cart. Click the link for more information.

This Aristocrat Air-Hardening Oversize Tolerance Ground Flat Stock is made by Precision Marshall Steel Company. The steel type is AISI D-2 tool steel, annealed for easier machining. It is a fine quality, air-hardening, electric furnace melt tool steel. The combination of superior abrasion resistance and toughness of D-2 is a result of its high carbon and high chromium analyses. Aristocrat is an extraordinary tool steel that can be used for the most demanding application. It is in the full spheroidized condition, 100% free of decarb and other surface imperfections.

The standard nominal sizes are ground to a satin finish on four sides, free of decarburization, held to tight tolerances in dimensions and squareness, and ready for layout. Each piece is lightly coated with rust-preventive oil and individually packaged in a vapor-resistant envelope which has the size and steel type clearly marked. All ends are precisely cut and deburred to insure excellent yields and handling safety. Thicknesses 3/16" and up are cold-sawn, while lighter sections are sheared. At least one end is painted white for easier identification of the steel type.

The oversize Thickness |T| tolerance is +.010/+.015". The oversize Width |W| tolerance is +.010/+.015". The 18" Length |L| tolerance is +.125/.250". The 36" Length |L| is tolerance +.250/.500".

The available thicknesses are 1/8 to 1 inches. The available widths are 1/2 to 6 inches. Please contact us if you need a different size, or if you need us to make any alterations.

RELATED: PM Precision GFS, Aristocrat D2 Ground Tool Steel

DELIVERY TIME: Normally in stock and ships the next business day.

SHIPS FROM: Precision Marshall products are sent directly to you from the warehouses in Bolingbrook, IL; Hartford, CT; Euless, TX; or Santa Fe Springs, CA.

MINIMUM ORDER: None.

HEAT TREATMENT: Preheat thoroughly at 1450-1500°F, then raise temperature to 1800-1850°F and hold until uniformly heated through. Soak at temperature 45-60 minutes per inch of thickness. To minimize surface ecarburization use salt bath, controlled atmosphere furnace or pack harden. Use high side of hardness for thicker sections.

TEMPERING DATA:

Temper °F	Rockwell C Hardness
As Hardened	62-65
400	60-60
500	59-62
600	57-59
700	57-59
800	57-59
900	59-61

Visit Precision Marshall Ground Flat Stock to see additional products in this category.

DieSupplies.com - Precision Marshall Ground Flat Stock and Drill Rod / Precision Marshall <br>Ground Flat Stock / All Products

W1 Cold-Drawn Flat Stock, Water Hardening Tool Steel Watercrat PM

H13 Oversize Ground Flat Stock, Hot Work Tool Steel Firechrome PM

420 Oversize Ground Flat Stock, Stainless Steel Ruetom Special PM

410 Precision Ground Flat Stock, Stainless Steel Premar PM

440C Oversize Ground Flat Stock, Stainless Steel Premar PM

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM, 72" Long

4142 Precision Ground Flat Stock, Pre-hardened Steel Nutec42 PM

S7 Oversize Ground Flat Stock, Shock Resistant Tool Steel Super-7 PM

C1018 Precision Ground Flat Stock, Low Carbon Steel Marshallcrat PM

D2 Oversize Ground Flat Stock, High Carbon Tool Steel Aristocrat PM